| Main Functions: | 
| FTM-100DR dual-band C4FM / FM car walkie-talkie | 
| 2 m / 70 cm dual band C4FM / FM car walkie-talkie | 
| 50 W 12.5 kHz C4FM / FM dual-band digital | 
| – C4FM digital 12.5 kHz bandwidth | 
| – V/D mode, voice FR mode, data FR mode and analog FM mode | 
| C4FM digital signal and traditional analog signal recognition based on AMS (automatic selection mode) function | 
| – Intelligent navigation *1 | 
| – Digital group call mode | 
| – Support advanced VoIP functions based on amateur radio WIRES-X | 
| – Free creation of WIRES-X chat room (need to choose HRI-200) | 
| – High power RF output 50 W/ 20 W/ 5 W for 144/430 MHz band | 
| – 160 x 40 dot matrix white LED backlight full dot matrix display | 
| – Built-in highly sensitive 66ch GPS antenna (front panel) | 
| – Receiving and forwarding image data *2 | 
| DSQ (Digital squelch code) signal | 
| – 1200 BPS / 9600 BPS APRS functionality | 
| – Broadband receiving 108 MHz – 999.99 MHz*3 | 
| – Bright colourful mode / dynamic state indicator light shows the state of reception | 
| – Built-in microSD card slot | 
| – Built-in high stability + 2.5 ppm TCXO | 
| – Bluetooth profile free mode (need to select accessories BU-2 and BH-2A) | 
| – Voice wizard and recording function (need to select accessories FVS-2) | 
| *1 does not support backtracking capabilities. | 
| *2 can’t connect MH-85A11U snapshots. | 
| *3 does not support the simultaneous reception of the A band and the B band. | 
| Receive: | 
| 108-137 MHz (Aeronautical band) | 
| 137-174 MHz (144MHz HAM) | 
| 174-400 MHz (GEN1) | 
| 400-480 MHz (430MHz HAM) | 
| 480 – 999.99 MHz (GEN2) | 
| Launch: | 
| 137-174 MHz | 
| 400-480 MHz | 
| (only amateur band) | 
| Circuit Type: | 
| Double superheterodyne | 
| Modulation methods: F1D, F2D, F3D, F7W | 
| Radio frequency output power t:50 W/20W/5W (144/430MHz) | 
| Channel: 1040 | 
| Appearance size (W x H x D): | 
| Radio device: 140 x 45 x 164 mm without knob and fan | 
| Controller: 140 x 45 x 29 mm without knob | 
| Package Contents: | 
| 1. DTMF microphone MH-48A6JA | 
| 2. USB line | 
| 3. Install the bracket | 
| 4. Fuse DC power cord | 
| 5. Operation manual | 
| 6. Safety Guidelines | 
| 7. Warranty card | 
 
Reviews
There are no reviews yet.